IT8900G/L High Speed High Power DC Electronic Load

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

IT8900
IT8900 3
IT8900 2

IT8900G/L High Speed High Power DC Electronic Load

Enquire Now
Download Catalogue
  • Maximum power of single unit: 2-54kW
  • Current range: 4U module up to 600A, master/slave parallel control, power expansion up to 600kW
  • Multiple operating modes: CC, CV, CR, CP, CC+CV, CV+CR, CR+CC, CP+CC
  • Low and high current loading, internal resistance about 0.7mΩ
  • 500kHz high speed voltage and current sampling rate
  • Time measurement, battery discharge test
  • Short circuit simulation, automatic test function
  • Support OVP, OCP,OPP, OTP, current oscillation protection, current limit, power limit, fan blocking protection, reverse alarm, etc
IT8900G/L series high speed and high power DC electronic load features as fast current rise and fall and low voltage loading capability. It has three voltage ranges: 150V, 600V, 1200V, and the maximum power ranges from 2kW to 54kW for a single unit. it has wide-range design, independent master unit control.
It supports master-slave parallel connection, and the maximum power can be extended to 600kW. It has high power density, only 4U height unit can input 6kW. IT8900G/L has up to 8/4 operating modes with dynamic mode, OCP, OPP test, auto test and battery test. It has built-in CAN, LAN, GPIB, USB, RS232 and analog interfaces, etc., and has full protection. The IT8900G/L can be applied to the testing of EV batteries, A/D power supplies, server power supplies, DC charging piles, on-board chargers (OBCs), industrial motors, fuel cells, power electronics, and other power electronics products.

Performance:

  1. Power Range:
    • Single Unit: 2kW to 54kW.
    • Parallel Connection: Up to 600kW.
  3. Voltage Range:
    • 150V, 600V, 1200V.
  4. Current Range:
    • Up to 600A for a 4U module.
  5. Dynamic Mode:
    • Frequency up to 30kHz (150V models).
  6. Resolution and Accuracy:
    • Voltage: ±(0.025% + 0.025% FS) resolution down to 1mV.
    • Current: ±(0.05% + 0.1% FS) resolution down to 1mA.

Features:

  1. Operating Modes:
    • CC (Constant Current), CV (Constant Voltage), CR (Constant Resistance), CP (Constant Power), and combinations like CV+CC, CV+CR, etc.
  2. Advanced Testing:
    • Battery discharge tests with configurable cut-off conditions.
    • OCP/OPP tests for over-current and over-power protections.
    • Time measurements for power module start-up/shutdown and fuse-blowing.
  3. Programming:
    • List and dynamic modes for generating complex waveforms.
    • Adjustable rise/fall times and slopes for precise control.
  4. Safety and Reliability:
    • Full protection suite: OVP, OCP, OPP, OTP, reverse alarm, etc.
    • Soft power on/off to prevent voltage fluctuations.

Connectivity:

  1. Built-In Interfaces:
    • LAN, USB, RS232, GPIB, CAN, and external analog control.
  2. Parallel Operation:
    • Master-slave parallel connection for power expansion.

Design:

  1. Compact High-Density Units:
    • 4U height for up to 6kW.
    • Supports modular, scalable configurations.
  2. Low Voltage Loading:
    • Internal resistance of about 0.7mΩ, suitable for low-voltage, high-current applications like fuel cells and solar cells.

Applications:

  • Testing EV batteries, server power supplies, DC-DC converters, charging piles, fuel cells, and industrial motors.
  • Aging tests and safety tests for power electronics and manufacturing systems.

You May Be Interested

High Common Mode Differential Probes

The DL-HCM series probes by Teledyne LeCroy are advanced 60 V common-mode differential probes designed for precise power conversion measurements in GaN-based and 48 V systems. Offering bandwidths of 250 MHz (DL02-HCM), 500 MHz (DL05-HCM), and 1 GHz (DL10-HCM), these probes feature 80 V differential and 60 V common-mode voltage ranges, making them ideal for high-power DC-DC converters, AC-DC power supplies, and wireless charging systems. Exceptional accuracy, low noise, and a wide range of tips enhance their versatility and usability.

Read More

Low Noise Differential Probes

The Teledyne LeCroy low noise differential probe collection includes a diverse range of differential probes tailored for high-precision signal measurements. These probes span from low-bandwidth models like the ZD Series (up to 1.5 GHz) and ZD200 (200 MHz) for automotive and general-purpose use, to high-bandwidth options such as the DH Series (8-30 GHz) for PCIe and DDR systems. The WaveLink System (4-6 GHz) offers superior signal fidelity for high-speed DDR signals, while the AP033 Active Differential Probe excels in capturing high-speed differential signals with bandwidth up to 500 MHz. With various tips and compatibility across multiple devices, these probes address diverse testing needs across industries.

Read More

Typhoon HIL 606

The Typhoon HIL606 is a flagship 4th-generation Hardware-in-the-Loop (HIL) simulator offering unmatched speed, power, and flexibility for real-time testing. Equipped with an 8-core processor, it enables simulation of complex models, including microgrids and fast-switching converters, with minimal simulation steps of 200 ns and digital input sampling at 3.5 ns. Its extensive connectivity options, including EtherCAT, CAN FD, and Quad SFP ports, allow seamless integration with diverse hardware and software tools. With the capacity to parallel up to 16 devices and robust support for real-time protocols, the HIL606 is ideal for advanced applications in e-mobility, microgrids, and high-frequency power systems.

Read More

Typhoon HIL 404

The Typhoon HIL404 is a 4th-generation Hardware-in-the-Loop (HIL) testing platform offering ultra-high fidelity and exceptional speed for real-time simulations. Designed for demanding applications in power electronics and automotive systems, it supports 200 ns simulation time steps and 3.5 ns digital input sampling resolution, making it the fastest HIL device available. The HIL404 features advanced nonlinear machine modeling, real-time semiconductor power loss emulation, and seamless integration with simulation tools like MATLAB/Simulink and JMAG. With extensive connectivity options, it supports rapid control prototyping, automated testing, and real-time emulation of complex systems such as microgrids, motor drives, and battery inverters.

Read More

Active Voltage Probes

The ZS Series high-impedance active probes from Teledyne LeCroy are designed for high-fidelity signal measurements up to 4 GHz. With high input resistance (1 MΩ) and low input capacitance (0.6–0.9 pF), they minimize circuit loading, preserving signal integrity across a wide frequency range. These probes feature ±8 V dynamic range, ±12 V offset capability, and come with a variety of tips and grounding options to handle diverse probing challenges. Their compact design integrates seamlessly with oscilloscopes, ensuring ease of use and accurate performance. Models are tailored for oscilloscopes ranging from 1 GHz to 4 GHz bandwidth.

Read More

High Voltage Differential Probes

The HVD3000A series high voltage differential probes by Teledyne LeCroy are designed for precise and safe measurements in high-voltage environments. These probes feature exceptional common-mode rejection ratios (CMRR) across a broad frequency range, making them ideal for noisy power electronics. They are capable of measuring up to 7 kV differential voltages with high accuracy (1% gain) and support applications from solar PV systems to electric drives and switch-mode power supplies. The ProBus interface ensures seamless integration with compatible oscilloscopes, offering auto-scaling and no need for additional power supplies. With CAT safety ratings up to 6 kV and wide bandwidths up to 400 MHz, these probes are versatile tools for high-performance testing.

Read More
Quick Links
Products Categories
Subscribe
Copyright © 2025 Genetron Corp. All Rights Reserved. | Web Design by OOm