• Three-stage current range, higher accuracy and lower ripple
• Supports master-slave parallel connection of 16-channel modules
• Faster dynamic response, the current rising and falling slope of a single module can achieve 12A/μs
• Stable operation down to zero volts
• Faster loop speed, precise control of current without overshoot
• The voltage and current measurement speed up to 250kHz, system integration suitable
• Comprehensive protection functions: OVP/OCP/OPP/OTP, Sense protection
• Short-circuit peak current measurement function
• Available front/rear terminals
• 8 operating modes: CC/ CV/ CR/ CW/ CV+CC/ CR+CC/ CW+CC/ CV+CR (CR-LED)
• Multi channel synchronous control

• Adopt advanced SiC technology
• High power density, 3U up to 15kVA
• Master-slave parallel with current sharing technology, up to 960kVA, multiple units in parallel work as one
  Voltage up to 350V L-N
• Output frequency: 16-2400Hz, programmable slew rate setting for changing voltage and frequency
• Built-in single/3-phase AC power meter
• Multi-channel function, single unit can connect/test up to 3 DUTs
• 4 output modes: AC/DC/AC+DC/DC+AC
• Harmonics, inter-harmonics waveform synthesizer
• Programmable output impedance

•  2 in 1 device integrating bidirectional DC power supply and electronics load supported by advanced third-generation SiC technology
• Seamless current switch between souring and sinking
• Stand-alone power up to 144kW, expandable in parallel up to 2 MW
• Voltage output ratings: 0-2250V
• Current output ratings: 0 to 2040A (single cabinet), 0 to 8000A (parallel connection between cabinets)
• Support CC/CV loop speed and priority setting
• Partial pre-compliant with LV123, LV148, DIN40839, ISO-16750-2, SAEJ1113-11,LV124 and ISO21848 automotive testing standards
• Battery cycle test – support CC/CV/CP
• Built-in waveform generator, support generating arbitrary waveforms
• PV simulator(with SAS1000) – solar array I-V curves simulation
• Battery simulator(with BSS2000) -Characteristic simulation of various batteries

• Adopt advanced SiC technology
• High power density, 21kVA in 3U unit
• Master/Slave parallel, power up to 1MVA+
• High efficient energy regeneration
• Working modes: single-phase, three-phase, reverse phase（split phase. Rated voltage can be extended to 200% under reverse phase（split phase）
• Frequency: 16-500Hz
• Support NORMAL/LIST/SWEEP/Surge&Sag modes
• Built-in various waveforms
• Touch screen, simple UI for easy operation
• Built-in USB/CAN/LAN/Digital IO interface, optional GPIB/Analog&RS232. Support CANopen*3、Modbus、LXI、SCPI communication
• AC mode supports CC/CP/CR/CS/CC+CR/CE multiple working modes, CE mode can simulate 14 circuit topologies such as single-phase rectifier RLC and parallel RLC
• AC mode supports both rectification and non-rectification modes
• DC mode supports 9 working modes such as CC/CR/CP/CV
• Adjustable crest factor: 1.414 ~ 5.0
• Supports phase shift, ranging from -90 º to 90.0 º *1

• Maximum power of single unit: 2-54kW
• Current range: 4U module up to 600A, master/slave parallel control, power expansion up to 600kW
• Multiple operating modes: CC, CV, CR, CP, CC+CV, CV+CR, CR+CC, CP+CC
• Low and high current loading, internal resistance about 0.7mΩ
• 500kHz high speed voltage and current sampling rate
• Time measurement, battery discharge test
• Short circuit simulation, automatic test function
• Support OVP, OCP,OPP, OTP, current oscillation protection, current limit, power limit, fan blocking protection, reverse alarm, etc

• Up to 1500V/720A/12kW
• Voltage range: 10~1500V
• Current range: 8A~720A
• Battery discharge test
• Short-circuit simulation
• 1U@6kW, 2U@12kW
• Master/slave parallel
• Power grid automatic detection

• 2U half rack, Power range: 1850W/3000W
• Voltage and current range: 30V-1200V, 150A
• Three output modes: CV/CC/CP
• Fast dynamic response: <1ms
• LIST mode simulation for power supply disturbance waveforms, adjustable rise and fall slope
• Fold back,UVP/OVP, UCP/OCP,OPP,OTP
• The Sense protection circuit to detect Sense reverse connection and missing connection
• Standard USB/LAN, optional RS232 & analog, GPIB

• Ultra-Compact 1U half rack
• Up to 850W per unit, parallel up to 16 units
• Dual channel support (IT-M3100D)
• High current resolution, up to 10nA (ITM3200)
• Supports USB, LAN, CAN, RS232, RS485, Analog & IO