Products

View Catalogue
Filters
Clear Filter

IT7800 High Power Programmable AC/DC Power Supply

  • Adopt advanced SiC technology
  • High power density, 3U up to 15kVA
  • Master-slave parallel with current sharing technology, up to 960kVA, multiple units in parallel work as one
    Voltage up to 350V L-N
  • Output frequency: 16-2400Hz, programmable slew rate setting for changing voltage and frequency
  • Built-in single/3-phase AC power meter
  • Multi-channel function, single unit can connect/test up to 3 DUTs
  • 4 output modes: AC/DC/AC+DC/DC+AC
  • Harmonics, inter-harmonics waveform synthesizer
  • Programmable output impedance
Read More

IT6000 B/C/D Regenerative/Bidirectional Programmable DC Power System

  •  2 in 1 device integrating bidirectional DC power supply and electronics load supported by advanced third-generation SiC technology
  • Seamless current switch between souring and sinking
  • Stand-alone power up to 144kW, expandable in parallel up to 2 MW
  • Voltage output ratings: 0-2250V
  • Current output ratings: 0 to 2040A (single cabinet), 0 to 8000A (parallel connection between cabinets)
  • Support CC/CV loop speed and priority setting
  • Partial pre-compliant with LV123, LV148, DIN40839, ISO-16750-2, SAEJ1113-11,LV124 and ISO21848 automotive testing standards
  • Battery cycle test – support CC/CV/CP
  • Built-in waveform generator, support generating arbitrary waveforms
  • PV simulator(with SAS1000) – solar array I-V curves simulation
  • Battery simulator(with BSS2000) -Characteristic simulation of various batteries
Read More

IT8200E Regenerative AC/DC Electronic Load

  • Adopt advanced SiC technology
  • High power density, 21kVA in 3U unit
  • Master/Slave parallel, power up to 1MVA+
  • High efficient energy regeneration
  • Working modes: single-phase, three-phase, reverse phase（split phase. Rated voltage can be extended to 200% under reverse phase（split phase）
  • Frequency: 16-500Hz
  • Support NORMAL/LIST/SWEEP/Surge&Sag modes
  • Built-in various waveforms
  • Touch screen, simple UI for easy operation
  • Built-in USB/CAN/LAN/Digital IO interface, optional GPIB/Analog&RS232. Support CANopen*3、Modbus、LXI、SCPI communication
  • AC mode supports CC/CP/CR/CS/CC+CR/CE multiple working modes, CE mode can simulate 14 circuit topologies such as single-phase rectifier RLC and parallel RLC
  • AC mode supports both rectification and non-rectification modes
  • DC mode supports 9 working modes such as CC/CR/CP/CV
  • Adjustable crest factor: 1.414 ~ 5.0
  • Supports phase shift, ranging from -90 º to 90.0 º *1
Read More
T3DSO3000HD, digital test and measurement equipment

T3DSO3000HD

The Teledyne Test Tools T3DSO3000HD series oscilloscopes deliver 12-bit resolution for precise signal analysis and are available in bandwidths ranging from 200 MHz to 1 GHz. With a maximum sampling rate of 4 GS/s, a deep memory depth of up to 400 Mpts/ch, and a waveform capture rate of up to 890,000 wfm/s in sequence mode, these oscilloscopes are equipped for advanced debugging. They include powerful features such as a 10.1” capacitive touch screen, serial protocol decoding, optional 16-channel mixed signal capability, and applications like Bode Plot and Power Analysis, making them ideal for engineers requiring high performance and versatility.

Bandwidth Selection:

200 MHz, 350 MHz, 500 MHz, 1 GHz

Resolution:

12 Bits

Sampling Rate:

4 GS/s (interleaving mode), 2 GS/s (non-interleaving mode)

Max Memory:

400 Mpts

Channels:

4

Read More
T3DSO2000HD, test and measurement oscilloscope

T3DSO2000HD

The Teledyne Test Tools T3DSO2000HD series oscilloscopes feature 12-bit resolution with bandwidths ranging from 100 MHz to 350 MHz, ensuring precise and low-noise signal measurements. They offer up to 2 GS/s sampling rate and 200 Mpts/ch memory depth, paired with advanced debugging tools like serial protocol decoding, Bode Plot, and Power Analysis. With a high waveform capture rate of up to 500,000 wfm/s, a 10.1” capacitive touch screen, and support for 16 digital channels, the T3DSO2000HD is ideal for comprehensive signal analysis in various applications, from R&D to production testing.

Bandwidth Selection:

100 MHz, 200 MHz, 350 MHz

Resolution:

12 Bits

Sampling Rate:

2 GS/s (interleaved), 1 GS/s (non-interleaved)

Max Memory:

200 Mpts

Channels:

4

Read More
T3DSO1000HD, test and measurement equipment

T3DSO1000HD

The Teledyne Test Tools T3DSO1000HD Series Digital Oscilloscopes offer 12-bit resolution with bandwidth options of 100 MHz and 200 MHz, delivering high precision and low noise signal capture. Equipped with a waveform capture rate of up to 500,000 wfm/s, a 10.1” capacitive touch screen, and advanced features like serial decoding, Bode Plot, and Power Analysis, these oscilloscopes are ideal for comprehensive signal analysis and debugging. The series supports up to 4 analog channels, optional 16 digital channels, and advanced triggering, math, and measurement functions, making it versatile for a wide range of applications.

Bandwidth Selection:

100 MHz, 200 MHz

Resolution:

12 Bits

Sampling Rate:

2 GS/s (single channel), 1 GS/s (two channels), 500 MS/s (four channels).

Max Memory:

100 Mpts

Channels:

4

Read More
Teledyne LeCroy Xena protocol analyzer

Xena Chassis

Teledyne LeCroy Xena offers two primary chassis options for their Ethernet test modules: the 4U XenaBay and the 1U XenaCompact. The 4U XenaBay supports up to 12 test modules, providing high port density and flexibility for configurations such as up to 4 x 800G or 72 dedicated 10G ports. It offers quick reconfiguration with modules that can be moved and replaced within minutes. The 1U XenaCompact is a compact, fixed chassis that houses one test module, making it ideal for desktop use where space is limited. Both chassis options are designed to deliver efficient power consumption and cooling, meeting diverse needs in Ethernet testing.

Read More
Z800 Freya, Ethernet traffic generation and protocol analyzer

Z800 Freya

The Z800 Freya is Teledyne LeCroy Xena’s premier Ethernet traffic generation and analysis solution, engineered to test high-speed Ethernet interfaces from 10G to 800G. Supporting both NRZ and PAM4 signaling, it accommodates a wide range of Ethernet speeds, including 10GE, 25GE, 50GE, 100GE, 200GE, 400GE, and 800GE. The module is compatible with QSFP-DD800 and OSFP-800 transceivers, providing flexibility in connectivity options. Key features include Auto-Negotiation and Link Training (AN/LT) capabilities, extensive Layer 1 features, and support for test automation via CLI and Python libraries, making it an ideal solution for validating the conformance, performance, and integrity of networking devices and semiconductors designed to operate at these high data rates.

Read More
Quick Links
Products Categories
Subscribe
Copyright © 2025 Genetron Corp. All Rights Reserved. | Web Design by OOm